User manual

ATL Berkshire 5000 User Manual, Release 2.2.1
- -
119
7.12 NAT Configuration (STUN)
You can configure STUN from the web interface. There are four NAT (STUN) settings: Use STUN,
Server Host, Server Port and Refresh Interval.
You can enable / disable STUN by clicking the radio button.
For STUN Server Host and Port Number, you can input the appropriate settings.
For Refresh Interval, the range is 0 – 300 seconds.
After finishing the configuration, click “bottom” to jump to bottom of page. Save the settings by clicking
“Save configuration”.
For details of STUN, please refer to Section 5 “Working with NAT (STUN)”.
After setting the STUN Server Host, you could use the Diagnostic tool NAT Discovery. For more details
of NAT Discovery, also refer to Section 5 “Working with NAT (STUN)”.