User manual

ATL Berkshire 5000 User Manual, Release 2.2.1
101
6. Input the IP address of the HTTP Server as shown in the example below. The input
method is by default, H (hostname) or, after toggling with “#” key, I (IP address).
T F T P S e r v e r
H
1 0 . 6 . 9 6 . 1 8
7. Press ‘OK’ to save the setting. The following screen would be the output.
P l e a s e w a i t . . .
8. Then, you would return to:
2 > H T T P S e r v e r ↑
3 T F T P S e r v e r ↓
6.9.2 TFTP Server
You could also use TFTP server for upgrading the firmware of the phone. To change the IP
address of the TFTP server, follow these steps:
1. Press the ‘Menu / Delete’ button to enter the phone menu.
2. Scroll down and enter ‘Settings’.
4 > S e t t i n g s ↑
5 S w i t c h U s e r ↓
3. Enter ‘Phone’.
1 > P h o n e
2 N e t work ↓
4. Enter ‘Firmware Upgrade’.
5 H T T P A u t o C o n f i g ↑
6 > F i r mware Upgrd