Operating instructions

17
Do not operate machine before having read
the operating instructions, understood all the
notes and assembly the machine as
described here.
Keep the instructions in a safe place for future use.
Contents
Assembly of the saw 1
Declaration of conformity 17
Extent of delivery 17
Characteristics noise values 17
Symbols machine /operating instructions 18
Normal intended use 18
Residual risks 18
Security instructions 19
Before the first commissioning 20
Commissioning 21
Adjusting the saw 21
Working instructions 23
Maintenance and care 24
Transport 25
Storage 25
Guarantee 25
Possible faults 25
Technical data 26
Replacing the saw blade 84
Description of device / Spare parts 89
EC Declaration of Conformity
according to EC directive: 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Tischkreissäge (Circular Saw Bench) type 250 ECO
Serial number: see last page
is conform with the above mentioned EC directives as well as with
the provisions of the guidelines below:
2004/108/EC and 2006/95/EC.
Following harmonized standards have been applied:
EN 61029-1:2009; EN 61029-2-1:2002; EN 55014-1:2006;
EN 61000-3-2:2006; EN 61000-3-3:1995+A1+A2,
EN 55014-2:1997+A1
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
Ahlen, 01.04.2010 A. Pollmeier, management
Extent of delivery
 After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
• Circular saw T 250 ECO including
− Power cable and plug
− TCT saw blade ∅ 250
− Splitting wedge
• Supporting leg (4x)
• Connection strut – short (2x)
• Connection strut – long (2x)
• Leg (2x)
• Safety guard with exhaust outlet
• Longitudinal stop
• Table length extension
• Pushstick
• Extraction hose
• screw bag
• 2 spanners for replacing saw blade
• Operating manual
Characteristic data of noise
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of the machine as a bench to circular saw with standard
circular saw blade.
Noise power level
Sound pressure level at
the workplace
No-load L
WA
= 99.5 dB(A) L
pA
= 87.3 dB(A)
Load L
WA
= 111.1 dB(A) L
pA
= 99.2 dB(A)
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although there is
a relationship between emission and immersion levels, it can be
reliably deduced whether additional precautionary measures are
necessary or not. Factors, which can influence the immersion level
currently existing at the workplace include the duration of the effects,
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This
information should however enable an improved assessment of the
danger and risk to be carried out.