User Guide

8
Contents
Extent of delivery 8
Declaration of conformity 8
Description of device / Spare parts 8
Operating times 8
Symbols machine 8
Symbols used in the original instructions 9
Proper use 9
Residual risks 9
Safety instructions 9
Assembly 11
Start-up 11
Working instructions 12
Working with the tiller 12
Maintenance and cleaning 12
Transport 13
Storage 13
Possible faults 13
Technical data 14
Guarantee 14
Extent of delivery
 After unpacking, check the contents of the box
> That it is complete
> Check for possible transport damage
• 1 Pre-assembled device
• 1 Lower handle hoop
• 1 Upper handle hoop
• 1 Screw bag
• 1 Original instructions
• 1 Assembly and operating instruction sheet
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately.
EC Declaration of Conformity
according to EC directive: 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Bodenhacke (Tiller) type BH 700 and BH 800
Serial number: see last page
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
2004/108/EC, 2000/14/EC.
Following harmonized standards have been applied:
EN 60335-1:2002+A1+A11+A12+A2+A13;
EN 60335-1:2002/FprAF:2009; EN 62233:2008;
EN 55014-1:2006; EN 55014-2:1997+A1; EN 61000-3-2:2006;
EN 61000-3-3:1995+A1+A2; EN 709:1997+A2:2009
Conformity assessment procedure: 2000/14/EC - Appendix V.
BH 700 BH 800
Measured level of the acoustic output
L
WA
92,3 dB (A) 92,7 dB (A)
Guaranteed level of the acoustic
output L
WA
93 dB (A) 93 dB (A)
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
Ahlen, 17.05.2010 A. Pollmeier, management
Description of device / Spare parts
Pos. Denomination Order-no.
BH 700 BH 800
1 Handle 381594
2 Switch handle
3 Safety knob
4 Switch-plug unit 381503
5 Cable strain relief 381595
6 Cable holder 381526
7 Upper handle hoop left 381593
8 Upper handle hoop right 381592
9 Lower handle hoop 381591
10 Body cover 381580
11 Screw M6x45 390143
12 Washer A6.4 391634
13 Star grip M6 385028
14 Safety label 381579
15 Connecting rod 381590
16 Blade protection
17 Blade drum 381586 381587
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for the
noise control.
Symbols machine
Carefully read
original instructions
before handling the
machine.
Shut off engine
and remove power
cord before
performing
cleaning,
maintenance or
repair work.