User Guide

33
Chapter 5: Monitor and Manage
Log-in to WebPAM
Double-click on the WebPAM icon on your Windows desktop (right).
Or,
1. Launch your Browser.
2. In the Browser address field, type the entry explained below.
If you did not choose the External Security option during WebPAM
installation (see page 11), use the Regular connection.
If you chose the External Security option during WebPAM installation (see
page 11), use the Secure connection.
Regular Connection
• WebPAM uses an HTTP connection . . . . . . . . . . . . . . . . . . . . .http://
• Enter the Host PC’s IP address . . . . . . . . . . . .127.0.0.1 or localhost
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080
• Add to launch WebPAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ./ati
Together, your entry looks like this:
http://127.0.0.1:8080/ati or http://localhost:8080/ati
Secure Connection
• WebPAM uses a secure HTTP connection . . . . . . . . . . . . . . .https://
• Enter the Host PC’s IP address . . . . . . . . . . . .127.0.0.1 or localhost
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443
• Add to launch WebPAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ./ati
Together, your entry looks like this:
https://127.0.0.1:8443/ati or https://localhost:8443/ati
Note that the IP address shown above applies to a log-in at the Host PC.
When you log in over a network, enter the Host PC’s actual IP address or
hostname.
• Log-in to WebPAM (page 33)
• Language Selection (page 35)
• User Management (page 37)
• Host Management (page 45)
• Utility Configuration (page 46)
•ATI (page47)
• Controller (page 48)
• Physical Drives (page 52)
• Logical Drives (page 60)
• Spare Drives (page 80)