User Guide

WebPAM User Manual
18
Access a Host PC
WebPAM includes a navigation tree or Tree View in the left frame of the browser
window. Click on the + icons to expand the tree. A Host PC’s RAID system is
made up of:
Administrative Tools – User and Host Management and Utility
Configuration
Host – Controller, Physical Drives, Logical Drives, and Spare Drives
If you do not see these details in the Tree View and you are connecting over a
network, it means your network connection to the Host PC is not working.
Restore your connection before proceeding.
If you do not see WebPAM at all, lower your browser’s security settings.
A detailed discussion of WebPAM graphic user interface is found in Chapter 4 on
page 27.
Recommended Initial Settings
These settings are recommended and now is the best time to make them. You
can change them later as necessary.
Administrator’s Settings
To make the Administrator’s password and notification settings:
1. In Tree View, under Administrative Tools, click on the User Management
icon
2. In the Management Window, click on the admin link.
Note
In order to display some of the supported languages, you might
have to install additional fonts or other files to your operating
system.