User Guide

Reference 45

Screen image is off-center, color balance is wrong, or there is

no picture

•

Try adjusting the brightness, sharpness, contrast, and color

balance controls of your monitor.

•

Try adjusting the centering and positioning controls of your

monitor to position the picture on the screen.

Note: The Monitor Tuning settings in Display Properties >

Adjustment tune the position of the picture on the screen via

the video signal.

•

Set the monitor’s RGB inputs (and sync switches, if this option

is available) to 75 Ohms, with the sync set to external.

Operating system warns that the video card is not configured

properly

•

Check the driver installation and make sure that all software is

correctly loaded corresponding to your operating system and

applications. For more information, please see

Installing the

Software.

•

Set Windows back to ‘Standard VGA’ and re-install the

Fire GL4 drivers.

How to enable a two-monitor mode video mode?

Select Enable two-monitor modes on the DualScreen page

of the Display Properties.

Select a two-monitor resolution - that is twice a horizontal

single-monitor resolution - on the Settings page of the Display

Properties. For example: 1280x1024 is a single monitor

resolution - one monitor will be used. 2560x1024 provides the

same resolution, but both monitors will be used.