User Guide

Installing the Fire GL4 21
ReadMe file
Select Readme from the Fire GL CD start menu to display a
readme file. Refer to this file for additional and ‘last minute’
information. Information in this file may not appear in printed
documentation or online help.
Driver installation dialog
The installation dialog will display in English if your operating
system’s language is not supported.
Software Installation for Windows NT4.0
1 Run the Quick Start utility. The Quick Start utility will start
automatically, if you insert the Fire GL CD into your CD-ROM
drive after the operating system has started. If your CD-ROM
auto-run is not enabled and/or the Quick Start program does not
start automatically:
Click the
Start
button in the task bar, click
Run
, and then select
START.EXE from the root directory of the Fire GL CD.
2 Click Start Installation.
Note
The installation routine now checks if your Windows NT
4.0 is correctly updated with Service Pack 6. If not, you
are prompted if you want to install the drivers and Service
Pack 6 at this time – if the appropriate language version is
available on the Fire GL CD.
If the Fire GL CD cannot install the Service Pack to your
system, the driver installation stops. Obtain Windows NT
Service Pack 6 from Microsoft, update your Windows
NT 4.0, and run the Quick Start utility again