Specifications

audio.com

FIELD ACCESSORIES:

PROK-1 Unit protection kit, which consists of a set of side plates

with, attached side brackets. The side plates protect the

front panel controls and the rear XLR connectors from

impact damage and provide attachment points for a

shoulder strap (not included); the slide brackets allow easy

quick change of remote power packs.

ABAG-1 Wraparound carry case with strap (PROK-1 above is

included), houses the MX series of mixers with slide

mounted PPA, DCA or BBU power modules. Space for

auxiliary NP-1 type batteries.

REMOTE POWER PACKS: - For use with Field Accessories

PPA-1 Integrated power pack assembly for remote operation,

which mounts to a mixer. Includes housing with

rechargeable 24VDC gel-cell battery pack (four to six hours

operation), and an external battery charger operating

at 115VAC/60 Hz.

PPA-2 Same as above except battery charger operating at

230VAC/50 Hz. Euro-plug. Contact factory for other plug

configurations.

PPA-B Extra 24VDC rechargeable gel-cell battery pack, charger

not included.

DCA100-1 Integrated DC/DC converter, which mounts to the mixer and

accepts external battery power with DC inputs from 6 to 18

volts to produce 24VDC mixer power. Four pin XLR battery

connector.

BBU100-1 Battery Pack houses four 9V alkaline or lithium batteries

(not included) for remote operation or back-up power.