Specifications

audio.com

PERFORMANCE SPECIFICATIONS

All units require a 24VDC power supply, which is ordered separately.

OUTPUT LEVEL: +22dBm MAX, +4dBm Nominal into 600 ohm

balanced or unbalanced lines. Output is selectable

+4dBm (Line) or -50dBm (Mic).

FREQUENCY RESPONSE: +0/-.5dB 20Hz to 20kHz

MX101 only: Switchable low cut filters -15dB @ 20 Hz, -3dB @

125 Hz

DISTORTION: .5% THD Maximum 20Hz to 20kHz at +20dBm

NOISE: MIC Input: EIN = -124dBm, 54dB gain; LINE

Input: EIN = -88dBm, 14dB gain 20Hz to 20kHz

measurement bandwidth.

GAIN: MX: MIC: 52, 72 & 92dB; LINE: 32 & 42dB Gain of

each input is selectable.

XP100: MIC: 40dB; LINE: 0dB

HEADPHONE OUTPUT: 100mW to 600/150-Ohm Headphones, TRS Jack

LIMITER: MX101/MX100C only: 5:1 SLOPE, Attack time

50ms, Recovery time 300ms for 10dB change.

PHANTOM POWER: +20VDC regulated @ 4ma through paralleled

3.32K Ohm resistors

POWER: 24VDC, 22 to 30 VDC max. MX100 and MX101

draw 120 mA nom., 150 mA max. XP100 draws 70

mA nom, 82 mA maximum.

DIMENSIONS in.(cm): 1.75(4.45)H X 5.6(14.22)W X 5.75(14.6)D; 1.25

lbs.57Kg

MOUNTING: Free standing or rack mountable; one, two or three

units in 1-3/4”

CONNECTORS: Standard 3 pin XLR female inputs and XLR male

output. Pin 1 ground

CUE (Director Input): MX101 only: Unbalanced -10dBu, 2.5 mm TS jack.