Owner`s manual

Page 9, Data Sheet 4020, rev: Saturday, October 06, 2007
The Image file, Calibrate_Image_1, is a PhotoShop .psd
file that looks like the image to the right. The 4x5 (B&W)
image is in RGB mode. It can be dragged from one corner
to the other for making test prints.
After you have made one test print, you can run the same
sheet of paper back through the printer and print the
image in another corner of the sheet. Just drag the image
to a different corner of the canvas before making the next
print. This technique will allow you to make four test
prints on one sheet of paper. The 4x5 image prints quickly
and only uses 1/4 of a sheet of paper.