Owner`s manual

Page 22, Data Sheet 4020, rev: Saturday, October 06, 2007
This is the place in the Epson driver where you
can fine tune the color balance of your print.
Although you will SAVE the color adjustments settings, I
suggest that you also write down someplace the same
information as a hedge against the time when your computer
crashes and you lose all of the settings. It is a really major
pain to have to do all the trial & error testing to re-create the
calibration settings.
Here is where you make fine-tuning
adjustments to calibrate the output
from your printer to match what you
see on your monitor screen. If your
printer does not have adjustments like
these… you cannot calibrate your
printer to match your monitor.
Make a note someplace of the final settings that you wind up using. This will
allow you to re-set things if your system ever crashes and you lose all of the
configuration files on your C: drive. It happens!