Owner`s manual

Page 13, Data Sheet 4020, rev: Saturday, October 06, 2007
That will bring up a window that will look like the one above. First, click on SHOW MORE OPTIONS.
That will open up the bottom half of the window. Then Click on the arrow head and select COLOR
MANAGEMENT.
Then, below that, be sure that there is a check on: DOCUMENT: COLORMATCH RGB
Just below that. In the area called PRINT SPACE, Profile,…... select ColorMatch RGB…. Or, with some
of the newer printers (such as the R2400), set ―Epson Stylus R2400‖ in this space. Try it both ways if
you have problems. The correct setting depends on just WHICH model of Epson you are using. The older
models used the ColorMatch RGB setting, the newer models of printers use the name of the printer.
Then select PERCEPTUAL for the INTENT.
Once these settings are made, they will stay that way, if Photoshop is shut down properly. You should not
have to re-set these things the next time that you use Photoshop. However, until you are SURE that these
things are remaining the way you have just set them, you might want to double check them each time you
send an image file to the printer…. for a while.