Specifications

ATI Audio Inc. ■ Tel: [phone] ■ Fax: [phone] ■ [e-mail] ■ www.
audio.com
Each MX100 draws about 120mA and each XP100 draws 70mA; therefore, one
MX100 could be combined with up to four XP100 units on a single power supply
module (120 + (4 X 70) = 400mA). Any combination which totals less than
400mA can be powered by a single WA100-1 supply.
BATTERY POWER
Several battery power systems are available for field powering of the MX100 or
MX101.
The BBU100-1 houses four 9V alkaline or lithium batteries and will power the
MX101 for four to six hours.
The PPA-1 rechargeable gel-cell pack powers an MX101 for approximately six
hours and can be recharged overnight with the included dual-mode charger. The
PPA-1 is capable of approximately 500 charge-discharge cycles.
The DCA100-1 DC-to-DC Converter accepts inputs from 6 to 18 VDC and out-
puts 24VDC to operate a mixer from a 6.0 or 7.2V camcorder Ni-Cad, belt-pack
Ni-Cad packs, automotive 12V or 12.0-to-14.4 V NP-1 batteries. The DCA100-1
requires a standard 4 pin XLR input connector from the battery source (Pin 4
Positive, Pin 1 Ground). Adapter fixtures are available for NP-1 type batteries,
which can power an MX101 thru a DCA100-1 for up to 12 hours (13.2V NiMH
type).
The BBU100-1, PPA-1 and DCA100-1 can all mount directly to the underside of
the case or slip into the quick-change slide mounts provided with the PROK-1
protection kit or the ABAG-1 carry case. An NP-1 type battery and a spare can
be Velcro mounted to the inside of the carry case.
INSTALLATION
UNPACKING
Inspect the equipment. Shake it to see if anything is rattling around inside. If
there is any visible damage to the unit or to the box it came in, contact the factory
but do not return anything to ATI without prior authorization and shipping instruc-
tions. It may be necessary to have the shipping company inspect the unit and the
box at your location. Count the pieces! Don't throw out the boxes and packing
material until you are sure you have everything that is coming to you. The XP100
comes with an audio cable, P/N 20612-1, a DC cable, P/N 20602-1, and this in-
struction book. The MX100 comes with this instruction book but does not come
with any cables. The MX100 needs either its own included WA100-1 power
supply or an optional DC cable, P/N 20602-1, to share the supply of another mix-