Specifications

ATI Audio Inc. ■ Tel: [phone] ■ Fax: [phone] ■ [e-mail] ■ www.
audio.com
PERFORMANCE SPECIFICATIONS
OUTPUT LEVEL: +22dBm MAX, +4dBm Nominal into 600 ohm
balanced or unbalanced lines. Output is se-
lectable +4dBm (Line) or -50dBm (Mic).
FREQUENCY RESPONSE: +0/-.5dB 20Hz to 20kHz
FILTERS (MX101 only): Switchable low cut filters -15dB @ 20 Hz, -3dB
@ 125 Hz
DISTORTION: .5% THD Maximum 20Hz to 20kHz at +20dBm
NOISE: MIC Input: EIN = -124dBm, 54dB gain
LINE Input: EIN = -88dBm, 14dB gain, 20Hz to
20kHz measurement bandwidth
GAIN, MX SERIES: MIC: 52, 72 & 92dB; LINE: 32 & 42Db
Gain of each input is selectable
GAIN, XP100: MIC: 40dB; LINE: 0dB
HEADPHONE OUTPUT: 100mW to 600/150-Ohm Headphones, ¼-inch
TRS (Stereo) Jack
LIMITER: MX101/MX100C only: 5:1 SLOPE, Attack
Time 50ms, Recovery Time 300ms for 10dB
change
PHANTOM POWER: +20VDC regulated @ 4ma through paralleled
3.32K Ohm resistors
POWER: 24VDC, 22 to 30 VDC max. MX100 and
MX101 draw 120 mA nominal, 150 mA max.
XP100 draws 70 mA nominal, 82 mA max.
DIMENSIONS in. (cm): 1.75(4.45)H X 5.6(14.22)W X 5.75(14.6)D
WEIGHT 1.25 lbs. (.57kg) Net; 3 lbs (1.4kg) Shipping
MOUNTING: Free standing or rack mountable; one, two or
three units in 1-3/4 vertical rack space
CONNECTORS: 3 Standard 3-pin XLR female inputs and 1 XLR
male output; Pin 1 ground