Installation guide

Page 5

Connect one end of the audio cable (with stereo

miniplug) to the Sound Output port ( ) on your

XCLAIM TV tuner, and the other end to the Sound

Input port ( ) of your computer.

If you like, you can connect a PlainTalk microphone

(or a compatible

line-level

microphone) to the Sound

Input port ( ) on your XCLAIM TV tuner. Whenever

Xclaim Video Player is

not

running, this port provides

a pass-through function that routes audio to the

Sound Input port on your computer, for use by other

applications.

Now you are ready to turn on your computer.

Your XCLAIM TV tuner receives power from the

computer through the enhanced S-video cable. A power

indicator on the front of the XCLAIM TV tuner lights

whenever the tuner is properly connected and power is

applied to your computer. If the power indicator does not

light when XCLAIM TV is connected and your Macintosh

computer is on, make sure you are using the 7-pin

enhanced S-Video cable that comes with XCLAIM TV.

Connect the audio cable to

your computer’s Sound Input port

Sound Input port

Sound Output

Connect your PlainTalk microphone

to XCLAIM

TV’s Sound Input port

Computer’s

Stereo

Miniplug

NOTE