User guide

Chapter 3 Diagnostics 3-13
1. Insert the Supplemental CD into the DVD tray.
2. Reboot the server.
3. From the Supplemental CD main menu, select 1 to run the Hardware Diagnostics
software.
4. From the Hardware Diagnostics main menu, select Immediate Burn-In Testing.
5. Select Load Burn-in Script.
6. Type noinput.tst and press Enter.
If you are using a test you have created yourself, you need to enter
d:\testname.tst into the Load Burn-in Script field, where testname is the name of the
test you have created.
7. Select Perform Burn-in Tests to run the script.
8. When the tests are complete, press the Esc key to exit the Display Results window.
9. Select Exit to DOS and press Enter.
10. At the DOS prompt, type the following:
C:> d:
11. Type the following to list the contents of the diagnostic partition.
D:> dir
The noinput.jrl log is displayed.
3.6.4 Accessing the Diagnostic Partition on a Red Hat
Linux System
To access the diagnostic partition when you are running a Red Had Linux operating
system:
1. Remove the Supplemental CD from the DVD tray.
2. Reboot the server and start the Linux Red Hat operating system.
3. Become root (superuser).