User guide

Chapter 3 Diagnostics 3-3
3.2 System Information Menu
TABLE 3-1 describes each option in the System Information menu.
TABLE 3-1 System Information Menu Options
Option Description
System Overview Includes basic information about your system,
motherboard, BIOS, processor, memory cache, drives,
video, modem, network, buses, and ports.
Hardware ID Image Menu Enables you to create a document showing information
about your system, including comparisons between the
updates and the newest versions of your system. XML
is the default format; although, you can also choose a
text format (.txt).
System Management Information Provides information about the BIOS type, system,
motherboard, enclosure, processors, memory modules,
cache, slots, system event log, memory array, memory
devices, memory device mapped addresses, and
system boot.
PCI Bus Information Includes details about specific devices from pci-
config space within the system, similar to the System
Management Information section.
IDE Bus Information Shows the master/slave devices on the primary and
secondary IDE controllers.
PCMCIA/CardBus Info Not applicable to the Sun Fire X2100 Server.
Interrupt Vectors Details and lists device interrupt vector information.
IRQ Information Shows hardware interrupt assignments.
Device Drivers Shows device drivers loaded under Open DOS.
APM Information Tests the Advanced Power Management (APM)
capabilities of the system. You can choose to change
the power state, view the power status, indicate CPU
usage, get a PM event, or change the interface mode.
I/O Port Browser Shows the I/O port assignment for the hardware
devices on the system.
Memory Browser Enables you to view the mapped memory for the entire
system.
Sector Browser Reads sector information from the hard disks and DVD
disks sector by sector.