QuickSpecs
Replicated Setup
Saves BIOS settings to diskette or USB flash device in human readable file. Repset.exe utility can then
replicate these settings on machines being deployed without entering Computer Setup Utility (F10)
Memory Change Alert
(Requires HP Client
Manager Software)
Alerts management console if memory is removed or changed
Thermal Alert (Requires HP
Client Manager Software)
Monitors the temperature state within the chassis. Three modes:
NORMAL - normal temperature ranges
ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to avoid
shutdown or provide for a smoother system shutdown
SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the computer
without warning before hardware component damage occurs
Remote ROM Flash
Provides secure, fail-safe ROM image management from a central network console
Remote Wakeup
System administrators can power on, restart, and power off a client computer from a remote
location.
ACPI (Advanced
Configuration and Power
Management Interface)
Allows the system to enter and resume from low power modes (sleep states)
Controls system power consumption, making it possible to place individual cards and peripherals
in a low-power or powered-off state without affecting other elements of the system
Supports ACPI 2.0 for full compatibility with 64-bit operating systems
SMBIOS
System Management BIOS 2.3.5, previously known as DMI BIOS, for system management information
ROM revision levels
Identifies system ROM revision levels and reports in Computer Setup Utility (F10).
Version is stored in an industry standard memory location (SMBIOS) so that management SW
applications can use and report this information
System board revision level
Allows management SW to read revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified
Ownership Tag
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen
Remote ROM Flash
Provides secure, fail-safe ROM image management from a central network console
Remote Wakeup/
Remote Shutdown
System administrators can power on, restart, and power off a client computer from a remote
location.
Enables cost-effective power consumption when the administrator needs to distribute software,
perform security management, or update the ROM.
ROM Based Setup (F10)
and Start-up Diagnostics
Yes
Industry Standard
Industry StandardIndustry Standard
Industry Standard
Revision Supported by the BIOS
Revision Supported by the BIOSRevision Supported by the BIOS
Revision Supported by the BIOS
ACPI
Advanced Configuration and Power Management Interface, Version 2.0
ASF
Alert Standard Format Specification, Version 2.0
ATA (IDE)
AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b
ATAPI
ATAPI Removable Media Device BIOS Specification Version 1.0
BBS
BIOS Boot Specification v1.01
BIOS 32-bit Services
Standard BIOS 32-bit Service Directory Proposal
CD Boot
"El Torrito" Bootable CD-ROM Format Specification Version 1.0
EDD
Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0
EHCI
Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0
PCI
PCI Local Bus Specification, Revision 2.3
PCI Power Management Specification, Revision 1.1
PCI Firmware Specification, Revision 3.0, Draft .7
PCI Express
PCI Express Base Specification, Revision 1.0a
PMM
POST Memory Manager Specification, Version 1.01
QuickSpecs
HP xw4400 Workstation
HP xw4400 WorkstationHP xw4400 Workstation
HP xw4400 Workstation
Technical Specifications
DA - 12568 Canada — Version 12 — March 2, 2007
Page 25