User`s guide
Display Configurations 5
4When the New Hardware Found Wizard appears, at the appropriate
prompt insert the ATI Installation CD to load the drivers for your
RADEON™ X300 card.
To set up a multi-monitor display
1From the
Start menu click Control Panel, then Display. Click the
Settings tab to access the basic multi-monitor configuration settings.
Note: ATI software provides many additional configuration features
that can be accessed by clicking the
Advanced button from the
Display Properties > Settings tab.
2 Select the
Monitor icon identified by the number 2.
3Click
Extend my Windows desktop onto this monitor.
4 Set the
Screen Resolution and Color Quality as appropriate for the
second monitor. Click
Apply or OK to apply these new values.
• Refer to your Windows® online help and documentation for
further information on using the
Settings tab.
Note: When you use multiple monitors with your card, one monitor
will always be Primary. Any additional monitors will be designated
as Secondary.
Display Configurations
Your RADEON™ X300 graphics card provides dual display functionality
and TV Out. The following table lists the different ways you can connect
displays to your card.
Display
Configuration
Connector(s)
Used
Comments
Single CRT
display
VGA connector OR
DVI-I connector
with DVI-I-to-VGA
adapter
CRT- cathode ray tube analog display.
Single DFP
display
DVI-I connector DFP - digital flat panel display.
Single TV S-Video Out The S-Video out can also support a
composite connection via the S-
Video-to-Composite adapter.