User`s guide

42 Displays Manager Advanced View
To change your display configuration requires dragging and/or clicking or
right-clicking a display icon
Access Displays Manager
• From the Tree Menu, click Displays Manager.
Enable a secondary display device
1 From the Tree View pane, click Displays Manager.
2 Click the number 2 display icon in the right-hand box.
3 Click Yes to the Enable this display dialog.
• Optionally, right-click the number 2 icon in the right-hand box
and click Enable in the pop-up menu.
Note: Repeat steps 2 and 3 above for each additional connected
device. The number on the display icon will increment as more
displays are added.
Enable Extended Mode
If the secondary display is disabled:
1 From the Tree View pane, click Displays Manager.
2 Click the number 2 display icon in the right-hand box.
3 Click Yes to the Enable this display? dialog.
• Optionally, right-click the number 2 icon in the right-hand box
and click Enable in the pop-up menu.
If the secondary display is in Clone mode, Vertical or Horizontal Stretch
mode:
1 Click and drag the display icon from the Clone box to Additional
Displays box.
2 Release the mouse button and click Remove display.
• Optionally, right-click the number 2 icon in the right-hand box
and click Disable in the pop-up menu.
3 Click the number 2 icon in the right-hand box.
4 Click Yes to the Enable this display? dialog.
Enable Clone Mode
If the secondary device is disabled: