User`s guide

13
Profiles drop-
down list
Lists all of the Desktop or Full Screen 3D profiles that
you have saved. Selecting a profile from the list loads
those custom color settings for either your Desktop or
your full screen 3D application (depending on the state
of the radio buttons). To create a new profile, simply
type in a name and click Save.
Save button
Click this to save your current color settings to a
Desktop or Full Screen 3D profile, using the name you
specified in the list box. To restore these settings later,
simply select the Profile name from the list and click
Apply or OK.
Delete button
Deletes the profile that is selected in the Profiles list
box.
All Colors
checkbox
All Colors</b> to adjust the Gamma, Brightness or
Contrast for Red, Green, and Blue simultaneously. Note
that any individual color settings made are lost if All
Colors is selected, and the color settings revert back to
the previous All Colors settings.
Red Green
Blue radio
buttons
Adjusts the Gamma, Brightness or Contrast only for
the selected color component (Red, Green, or Blue).
Note that any individual color settings made are lost if
you select All Colors again.
Gamma slider
Increases or decreases the gamma correction of your
Desktop or full screen 3D application. Changing the
gamma alters the curvature of the color curve.
Brightness
slider
Increases or decreases the color brightness of your
Desktop or full screen 3D application. Changing the
brightness adjusts the vertical position of the color
curve.
Contrast
slider
Increases or decreases the color contrast of your
Desktop or full screen 3D application. Changing the
contrast adjusts the slope of the color curve.
Reset buttons
Click this to restore the individual slider setting to its
default value, then click Apply or OK.
Color preview
box
The color image indicates visually how the Gamma,
Brightness and Contrast sliders affect the final color
settings of your display device. In Desktop mode,
clicking on this with your mouse pointer will change the
image.