User`s guide

Set the Anti-Aliasing preference manually 67
Set the Anisotropic Filtering to automated preference
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Ensure the application override is enabled. To do so, make sure the
Let the Application Decide check box is selected.
Note: The slider control becomes unavailable.
Set the Catalyst™ A.I. setting
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Catalyst™ A.I.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Set the Mipmap detail level
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Mipmap Detail Level.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Set Wait for vertical refresh setting
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Wait for vertical refresh.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Apply your settings
1 Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2 Click OK to save your changes and exit the Catalyst™ Control
Center.
[e-mail] -- POWER COLOR
-- 202.133.241.51 -- Sunday, December 25, 2005