User`s guide

Page 21

If you are connecting your RADEON 8500 MAC EDITION to a

VCR, make sure that your VCR is connected to a television that

you can use as your computer’s display. For information about

connecting a television to your VCR, see the documentation

supplied with your VCR.

Now that you have connected your RADEON 8500 MAC

EDITION to a VCR, you need to enable Mac2TV.

Enabling Mac2TV

Open the ATI Displays control panel

Click on the Mac2TV icon

The Video Output will already be set to On (NTSC is the

default setting)

Click OK

A TV cannot be left connected to the graphics card if two

analog monitors are connected to the RADEON 8500 MAC

EDITION, even if the TV is off and not enabled in the software.

NOTE