User guide

8. Connect your TV and, optionally, FM radio input sources to the connectors

on the backplate of your tuner:

➭ For over-the-air digital TV, connect a DTV antenna to the ANT IN

connector.

➭ For analog TV or FM, connect either your cable TV coaxial cable or an

FM antenna to the TV IN connection.

9. Turn on the monitor, and then your computer.

If you have properly installed your card, operating system messages will appear

once the boot procedure is finished. Proceed with the installation of drivers and

software.

Software Installation

Note:

• You must install or reinstall the drivers and software in the following

cases:

• After you have installed the card in your system.

• After you have reinstalled or upgraded your operating system.

• To install or remove the drivers, you must be logged on as a user with

administrator rights. We also recommend that you have the latest

Windows Service Pack installed.

• If a previous version of the product is installed on your machine,

uninstall the drivers and software for the previous version.

• The setup and install screens are displayed in English if your

operating system's language is not supported

To install your software:

1. After installing your tuner, start your system.

2. When the Found New Hardware Wizard appears, click Cancel. When the

System Settings Change window asks you to restart your computer, click

No.

3. Insert the installation CD into your CD drive. The installation screen appears.

If your CD autorun is not enabled or the ATISETUP utility does not start

automatically, follow these steps:

a. In the Windows task bar, click the Start button.

b. Click Run.

c. In the Run dialog, type X:\ATISETUP.EXE (where X: is your CD/DVD

drive).

4. Click Software Install. The Software Install screen appears.

5. Click Install CATALYST. The ATI Software screen and installation wizard

appear.

6. Click Next and follow the instructions in the installation wizard to install your

drivers and configuration software.

P/N 117-70408-10