User`s guide

Page 35
Monitors & Sound control panel
1. Open the Monitors & Sound control panel.
2. Select the video output resolution and frequency you
want to use.
With Mac OS 7.6 and later, Video out modes are displayed
with the type of signal (PAL, Simulscan, or NTSC)
appended to the resolution.
A message appears stating that your monitor settings have
changed.
3. Click OK
If you do not click OK to the message on the TV, your
display will return to your monitor after a few seconds.
Control Strip
1. Select the video output resolution and frequency you
want to use.
With Mac OS 7.6 and later, Video out modes are displayed
with the type of signal (PAL, Simulscan, or NTSC)
appended to the resolution.
A message appears stating that your monitor settings have
changed.
2. Click OK
If you do not click OK to the message on the TV, your
display will return to your monitor after a few seconds.
With Mac OS 7.5.5, the type of video signal is not
displayed in either the Monitors & Sound control panel or
the Control Strip. All video resolutions are sorted and
grouped by frequency. However, you should use only the
ATI Displays control panel for the Mac2TV function with
Mac OS 7.5.5 since this is the only way to ensure the
proper video mode is displayed on your TV.
!