User`s guide

Page 32
To connect your computerÕs display to a VCR to record
to video tape
1. Turn off your computer and VCR.
2. Ensure your XCLAIM VR card is installed correctly.
3. Looking at the back of your computer, locate your
XCLAIM VR card.
4. Connect the video out adapter to the Video Out of
your XCLAIM VR card. (See diagram below.)
5. Determine if your VCR has an S-Video or Composite
video input connection.
6. Attach one end of an S-Video or Composite cable to
the video out adapter and the other to the video in
connector of your VCR.
Although the video out adapter has two connectors for
S-Video and Composite cables, you only need to connect
one to your VCR, either Composite or S-Video. If your
VCR has both input connections, S-Video will produce best
results.
You can connect a TV and a VCR to your XCLAIM VR
card using both output connectors on the video out adapter.
One must support the Composite format and the other
must support the S-Video format.
Video Out
Connector
Composite
Connector
S-Video
Connector
Video Out Adapter
NOTE