User`s guide

Page 31
4. Connect the video out adapter to the Video Out of
your XCLAIM VR card. (See diagram below.)
5. Determine if your TV has an S-Video or Composite
video input connection.
6. Attach one end of an S-Video or Composite cable to
the video out adapter and the other to the video in
connector of your TV.
Although the video out adapter has two connectors for
S-Video and Composite cables, you only need to connect
one to your TV, either Composite or S-Video. If your TV
has both input connections, S-Video will produce best
results.
You can connect two TVs to your XCLAIM VR card using
both output connectors on the video out adapter. One TV
must support the Composite format and the other must
support the S-Video format. Both TVÕs will display the
same image simultaneously.
7. Turn on your computer and your TV.
Now that you have connected your XCLAIM VR card to a
TV, you need to enable Mac2TV. For more information, see
ÒEnabling Mac2TVÓ on page 33.
Video Out
Connector
Composite
Connector
S-Video
Connector
Video Out Adapter
NOTE
NOTE