User`s guide

Page 28
4. Looking at the back of your computer, locate your
XCLAIM VR card.
5. Using an S-Video or Composite cable, attach one end
of the cable to the video in of your XCLAIM VR card
and the other to the video out of your VCR.
6. Turn on your computer and your VCR.
Using XCLAIM VR’s Video Capture with Third Party
Applications
XCLAIM VRÕs video input can be used with any third
party application that supports QuickTime capture
through video digitizer components. To determine if the
application supports QuickTime capture, see the
applicationÕs documentation.
To capture video using third party applications
Not all applications work exactly as described in this procedure.
See your application documentation for specific instructions.
1. Ensure that the video source (VCR or camcorder) is
properly connected to XCLAIM VR. (For more
information, see ÒUsing XCLAIM VRÕs Video In
ConnectorsÓ on page 27).
2. Launch the application and select the video capture
feature.
3. Select the Video Settings.
4. Select Source from the main popup menu which
normally is set to Compression.
5. Ensure that the Digitizer is set to ATI Video Digitizer.
NOTE