User`s guide

Page 8
Connect the monitor cable to the card.
If you have an Apple monitor, connect it to the Apple monitor port.
If you have a VGA monitor, connect it to the VGA monitor port.
Only connect one monitor to the card.
If your monitor is connected to the Apple monitor port, it must
support Apple’s Monitor Sense protocol, either directly or
through an appropriate adapter. For more information, see
“About Monitor Sensing” on page 9.
Installation of your Nexus GA card is now complete and you
are ready to install the software. See “Installing Software” on
page 11.
10
Apple monitor port
VGA monitor port
!
WARNING
• Serious damage to your system may occur if you
connect more than one monitor to the card. If you have
more than one monitor, you must connect it to another
graphics card.
NOTE
NexusGA.BK Page 8 20 November 1997 14:23