Installation guide

Limitations
29
Workaround: Open the Workgroup Properties tool on the editor and check whether any of the
services are not running. Restart any services as required. Then restart the Avid editing
application again. You may have to do this the first few times that you start the editor. After a few
times the services will begin starting automatically, even after a reboot.
iXML Metadata in BWAV Files
➤ Bug Number: . Multi-channel track identification information is not read from iXML
➤ Bug Number: . Markers in the iXMl are not imported when the file is linked.
➤ Bug Number: . Implied channel group information by file name pattern, as used by the audio
import code, is not available when using the WaveAIFF AMA.
➤ Bug Number: . Channel group information, the iXML data that is used to group multiple mono
files into a single clip, is not interpreted. To workaround this, reconstruct the channel groups
manually with AutoSync.
To reconstruct the multi-channel track identifications, set in the AMA setting link options for
Multichannel audio prior to linking, or edit afterward with multi-channel audio pane of clip
menu “modify” dialog.
Output
➤ You cannot control down/cross conversion from the Video Output Tool when in TrueP mode for
1080p projects or when you are in Stereoscopic mode.
Workaround: When in stereoscopic mode or have True Progressive output set for 1080p
projects, the down-convert and cross-convert options are not available. To output at a rate
different than the project format, go to the Format tab and change the output project setting.
Performance
➤ Bug Number: UDevC00179008. Foreground performance of the application could be impacted
while waveforms cache for systems attached to XDCAM EX device.
Play
➤ Bug Number: UDevC00153838. You might receive an “Exception: The sequence or one of its
source elements is too long to be played” error if you have a sequence over 12 hours.