Installation guide

Limitations

➤ Bug Number: UDevC00163957. Hue offset color wheels might not appear when you use Artist

Color to enter Color Correction mode the first time after start your Avid editing application. Any

parameter update will draw them.

Workaround: When you make any change in a parameter in the Color Correction tool, the

color wheels appear.

➤ Bug Number: UDevC00156948. (The F2 soft key (Next HSL Subtab) does not function until

after you apply a color correction to your footage. If you press F2 (Next HSL Subtab) on the

Artist Color surface before you apply a color correction, you get a system beep and the subtab

does not change.

➤ Bug Number: UDevC00157932. If you use the HSL shift control for trackballs, you might see

the trackballs controlling the wrong monitor during shuttle. For example, if you press Shift and

then use the right trackball to shuttle, and then move either the left or the center trackball, you

might see the other trackballs now control the right monitor.

➤ Bug Number: UDevC00164772. When you first ope n the Color Correction tool, either with the

Artist Color or with the mouse, incorrect color correction values might display in parameter

fields. This problem is intermittent, and it does not occur after you change a parameter value.

Workaround: Adjust any parameter. The correct values display in the Color Correction tool.

➤ Bug Number: UDevC00164954. (Macintosh only): The EuControl application does not open

when you select Edit Settings in the Controller Settings dialog box. To configure your EUCON

device, you must open the EuControl application by clicking the EUCON icon in the dock, and

then selecting Window > EuControl Settings.

Background Render

➤ Bug Number: UDevC00186139 . We do not support AMA linked QuickTime media with alpha

in Background Render.

Background Transcode

➤ Bug Number: UDevC00178938. The Background Queue window might stop refreshing

intermittently. Select Open Background Queue window from the task bar (Windows) or menu

bar (Macintosh) to view the background status in a browser.

➤ Bug Number: UDevC00180218. If you perform an ‘alldrives’ Console command and mount a

network drive, a background transcode will not be successful to the mounted network drive. A

foreground transcode will transcode successfully.