Installation guide

Setting up the NVIDIA Card

For more information on using these external fader controllers or mixers, see “Recording

Automation Gain or Automation Pan Information” in the Help.

Setting up the NVIDIA Card

To set up the NVIDIA card, you must make sure you have the correct display driver version

(install the display driver if necessary, and set the correct display settings. See the

“Compatibility

Chart” on page 16

for information on the supported driver(s).

Prior to setting up the NVIDIA card, check to make sure you have the correct display driver

version. If you do not have the correct NVIDIA driver, you can install it from the Utilities folder

that installs with your Avid application.

Installation files for these drivers are installed in the folder Program Files\Avid\Utilities\nVidia.

To check the NVIDIA display driver version:

1. Right-click the Desktop and select NVIDIA Control Panel. You can also open the Windows

Control Panel and double-click the NVIDIA Control Panel icon.

2. Click System Information at the bottom left corner of the NVIDIA Control Panel.

The version number is listed in the Graphics card information section on the ForceWare

version line.

To install the NVIDIA display driver:

1. Navigate to Program Files\Avid \Utilities \nVidia and double-click the folder that

corresponds to your operating system.

2. Double-click the file for the applicable driver.

3. Follow the on-screen instructions, and then restart your system.

To setup multiple displays:

1. Right-click the Desktop, and select Nvidia Control Panel.

2. In the settings window in the left of the window, click Set up multiple displays.

3. Select or deselect the desired monitors listed.

To set the Driver for Avid Editing Environments

1. Right-click the Desktop, and select Nvidia Control Panel.

2. Click Manage 3D Settings.

a. The Digi 002 can be used as a standalone audio mixer but not at the same time as it is being used as an automation gain or

automation pan controller or control surface.