User Guide

18 Installing the Hardware and Software
Connecting a Digital Flat-Panel (DFP) Monitor or
Digital CRT Monitor
Securely attach the monitor’s data cable to the DVI output connector
(2) on the card. Attach the cable to the monitor according to the
monitor's instructions. Please refer to the documentation that came
with your monitor if you need additional installation information.
Setting the Monitor Impedance
If you can switch the impedance values on your monitor, use the
following recommended settings:
•
RGB video input: 75 Ohm
•
Synch: 2.2 kOhm
Try other 'Synch' settings if you cannot achieve a stable video image.
If the impedance setting options are 'High' and 'Low' only, try the
setting that provides the most satisfactory monitor display.