User`s guide

Quick Start Information
007-4701-003 25
Powering Off Manually
To power off your system manually, follow these steps:
Caution: If you power off the system before you halt the operating system, you can lose
data.
1. Shut down the operating system by entering the following command:
# init 0
2. Press the power buttons or power switches on each of the modules that you want to
power off. You may power off the modules in any order:
• To power off the TP900 storage module, press the power button on its rear
panel to the OFF (
O) position.
To power off the base compute, XG2N, expansion compute, or CMPX module, press the
power button on the front panel of each module.
!