User`s guide

Safety Precautions
007-4701-003 11
Safety Measures
Observe the following safety measures when you install the system:
• Use caution when you remove the system from the shipping crate. Failure to handle
the system carefully can result in personal injury or property damage.
Warning: Ensure that the shipping crate is positioned close to its destination
before you unpack the crate.
Warning: Employ a minimum of two people to lift the module or modules off
the shipping pallet, to move the module(s) from one location to another, and to
install the module(s) in a rack. Otherwise, someone could be seriously injured.
• Do not move the system while it is connected to power.
Warning: Keep fingers and conductive tools away from high-voltage areas.
Failure to follow these precautions will result in serious injury or death. The
high-voltage areas of the system are indicated with high-voltage warning labels.
• Ensure that a qualified electrician has properly installed the power receptacles.
• Set all circuit breakers to the OFF (
O) position before you plug in the system power
cord.
Warning: Use the following guidelines to prevent the rack from toppling over.
Otherwise, people could be seriously injured and/or equipment could be
damaged.
Follow these guidelines to prevent the rack from toppling over:
• Make sure that only one module is extended out of the rack at one time.
• Install all equipment in the lowest available position in the rack.
• Ensure that the tip tray is bolted to the front of the rack.