User`s guide

Using Silicon Graphics Prism Modules with a Rack
007-4701-003 183
4. Place one of the mounting brackets on the back of the slide rail as shown in Figure B-2.
Adjust the position of the mounting bracket on the slide rail according to the depth of the
rack.
5. Place a bar nut next to the mounting bracket. Secure the mounting bracket to the slide rail by
inserting two 10-32 x 1/2-inch screws through the assembly and into the bar nut as shown in
Figure B-2.
6. Repeat steps 4 and 5 to attach a mounting bracket to the other slide rail.