User`s guide

Using Silicon Graphics Prism Modules with a Rack
007-4701-003 181
Slide Rail Mounting Hardware
Table B-2 lists the hardware that you will use to mount each module in a 19-inch rack.
Table B-2 Slide Rail Rackmounting Hardware
Hardware Type Qty Usage
Slide rail assembly (includes chassis rail) 2 Allows the module to slide in and out of rack.
(The left and right slides are identical.)
2-inch rear mounting bracket 2 Mounts the slide rails to the rear rack rails.
(The left and right brackets are identical.)
10-24 x 1/4-inch Phillips screw 10 Secures the chassis rails to the module.
10-32 x 1/2-inch Phillips screw
Shoulder washer
Bar nut
8
8
4
Secures the slide rails to the rack rails.
10-32 x 1/2-inch Phillips screw
Bar nut
4
2
Secures the slide rails to their mounting brackets.
10-32 clip nut 2 Provides a threaded hole for fastening the module front
panel to the rack rails.
10-32 x 1/2-inch Phillips screw 2 Fastens the module front panel to the clip nut.