User`s guide

128 007-4701-003
5: Troubleshooting
0xb6 Cache preloading PAL call failed.
0xb7 Scratch area overflowed the CPU’s caches.
0xb8 PAL_MEM_FOR_TEST failed.
0xb9 Bad address calculated for PAL_TEST_PROC
0xba PAL_COPY_INFO failed.
0xbb Bad PAL shadow address calculated
0xbc PAL_COPY_PAL failed.
0xbd SDA transfer area overflowed.
0xbe No PROM segment (eg. EFI) found.
0xbf PROM segment (eg. EFI) exited.
0xc0 Out of SAL->EFI handoff memory.
0xc1 Cache tests failed.
0xc2 Error flashing PROM.
0xc3 Could not write new value to cr.lid
0xd8 This unit has illegal DIMM population. Check and replace memory, see “Removing
and Replacing Memory DIMMs” on page 107.
0xf0 Waiting for primary lock.
Table 5-3 L1 Controller Hexadecimal Boot Error Codes (continued)
Error code Message Meaning or Action Needed