User`s guide

Removing and Replacing Memory DIMMs
007-4701-003 113
9. If using optional slide rails, press the safety latches on both sides of the module and
slide the module into the rack. For shelf-mounted units, use two people to slide the
module back into the rack.
10. Install the two screws that secure the module to the front rails of the rack. If shelf
rails are used, install the two rear screws.
11. Install all of the cables at the rear of the module.
12. Power on the Silicon Graphics Prism platform as described in “Power-On the
System” on page 22.
Figure 4-26 Removing a DIMM