User`s guide

PCI and PCI-X Cards
007-4701-003 89
12. If you are replacing the card that you have removed, reference the instructions in
“Installing a PCI or PCI-X Card” on page 83. If you are not replacing the card that
you have removed, proceed to the next step.
13. Place a blanking plate to cover the slot where you removed the card, and screw in
the retaining screw, as shown in Figure 4-11. After installing the blanking plate, if
you have removed a card from one of the two lowermost slots, proceed to the next
step. Otherwise, proceed to step 14.
Figure 4-11 Replacing a Blanking Plate