User`s guide

Installing Fire GL1 11
System Requirements and Tools
To use this card, you must have the following:
♦
a motherboard with free PCI/AGP 1.X slots for the number of
Fire GL1 cards you want to install.
♦
a Pentium II PC (or better)
♦
Windows NT 4.0 operating system with Service Pack 4 (or
newer)
♦
A screwdriver to remove and reinstall the PC cover screws and
card mounting screws. See your PC manual for specific
requirements.
♦
SuperCD CD-ROM for Fire GL1
Preparing your Computer
Before removing your old card…
If you are installing your Fire GL1 in place of a card from another
manufacturer, we recommend that you de-install the old card first.
Do the following:
♦
Use the uninstall program for your existing card, if one is
available. Consult the documentation for your old card if
necessary.
♦
If no uninstall program is available, install the standard VGA
driver via the
Display Properties
applet. For more
information refer to the following section, titled Installing the
Standard VGA Driver.