User`s guide

6 Connecting Display Devices
5 Locate the appropriate slot and, if necessary, remove the metal back-
plate cover.
6 Align your ATI graphics card with the slot and press it in firmly until
the card is fully seated.
7 Screw in or fasten the graphics card securely and replace the
computer cover.
8 Reconnect any cables you have disconnected and plug in the
computer’s power cord.
9 Turn on the monitor and then your computer.
Connecting Display Devices
The following connections are available:
Your FireGL™ card can connect one or two monitors, either DFP/digital
CRT or analog VGA. It can also connect a stereographics device.
You will need to use an adapter to connect analog VGA devices to the
DVI-I connections.
FireGL™ Baseplate Connections
X
DVI-I Connection (Supports dual-link output and HD Component
Adapter)
Y
Stereographics Connection
Z
DVI-I Connection (Supports dual-link output)