User`s guide

41
CHAPTER 3
Troubleshooting
The Readme file found on the ATI installation CD ROM, will
contain last minute information not provided in the User’s
Guide. The Readme file can be found in PM\PMCORE\MAIN.
Because a typical computer system consists of many different
parts, difficulties may arise from a combination of items. Check
the following list and find a symptom that’s similar, then try the
suggested solution.
No Audio from the TV Wonder VE
For correct audio performance, your sound card must be
active. Follow these steps to display the Line-In Audio
setting in the Windows
®
Volume Control Panel:
1
Right-click the speaker icon in the Taskbar.
2
Click Open Volume Controls.
3
If the Line-In volume control slider is not visible, click
Options, then click Properties. Select Line-In (or CD
Audio for internal audio connections) and click OK.
4
Adjust the volume setting of the Line-In volume control
slider.
5
If the Mute checkbox is checked, click it to turn off muting.
6
Close the window to save your settings.
Video is unstable.
• Check that you’re using the correct broadcast standard format
for your region.
• Check the quality of your incoming TV signal on another
receiver; bad reception may be the cause.
Video is in black and white only.
• Check the connectors setting to make sure you’ve selected
the correct input (CATV, or Composite) for your video source
device.
No video or audio.