User`s guide

18 Using the ATI Multimedia Center
To open the Video settings page
Click the Setup button in the TV Player control panel,
then click the Video tab.
TV Player Tuner settings
The tuner settings page lets you autoscan for active TV
channels, choose cable or antenna input, name channels, and set
channel-specific options.
To open the Tuner settings page
Click the Setup button in the TV Player control panel,
then click the Tuner tab.
Connector
Choose cable, composite input.
Standard
Choose the broadcast standard for your area.
Color
Brightness
Contrast
Tint
Adjusts the amount of color in the display.
Adjusts the amount of white in the display.
Adjusts the gradation of tone between highlights,
midtones, and shadows.
Adjusts the balance of red to blue.
Autoscan
Click to scan for all available channels and store them
when you click the OK button. When scanning is
complete, you can type a name for each channel in the
Channel Name box.
Global
Standard
Select the country and cable/antenna input.
Channel
Name
Type the channel name; the name will appear in the TV
Player control panel when that channel is active. (You
can also type the name directly into the control panel;
press Enter to confirm).
Details...
Select a channel, then click the Details... button to open
the
Channel Property Details
page (see
Channel
Property Details
on page 19).