User`s guide

Capturing from your VCR or Camcorder 39
7 The following
settings can be
made in the Setup
menu, under the
VCR tab.
8
S
elect the
recording quality
(note that the higher
the quality, the less
video you will be
able to store on a
given disk).
9 Next, under Record for ___ minutes, enter the number of
minutes you would like to record, OR select Stop when
SPACE is pressed if you want to manually stop recording
or record until your disk is full.
10 Select the drive you wish to record to under Record to
drive.
11 If you want to
override the
standard capture
settings and
manually select the
video format, frame
rate, audio format,
or pre-allocate disk
space for capturing,
click the Advanced
button. Change the
settings, then click
the OK button to return to the Setup window.
12 Click OK in the Setup window to accept the changes and
exit.
13 Click the Capture Video button to set up for
capturing video.
14 Cue your VCR or Camcorder to the location you would like
to start recording from.
15 Click OK to start video capture. Please note that you
cannot use your keyboard or mouse while capturing. Also
note that a countdown timer on the ATI Video Player
04Capture.fm Page 39 Friday, January 22, 1999 4:39 PM