User`s guide

16 Troubleshooting
No television audio.
• Select the sound card connector for TV audio input:
1
Click the TV button in the Task control panel.
2
Click the Setup button in the TV Tuner control panel.
3
Click the Video tab.
4
Click the Audio Input list box.
5
Select Line-In from the drop-down list then click OK.
If you have connected the audio internally, then choose
“CD Audio” or “AUX IN”, as appropriate.
Remember: to hear audio from the television, you must
make a connection between your ATI-TV Wonder tuner
card and your sound card. See Connecting the Audio on
page 9.
If you still cannot hear TV audio, check your mixer settings by following
the steps under Windows® 95 or Windows® 98 initial set up on page 13.
Windows
®
95 and Windows
®
98 troubleshooting tips.
• Right-click the ATI icon in the taskbar and select
Troubleshooting.
• If you have problems during start-up, start your computer in
Safe Mode.
To load Windows
®
95/Windows
®
98 in Safe Mode
1
Turn on your computer.
2
In Windows
®
95, press the F8 key when “Starting
Windows 95” appears on the screen.
In Windows
®
98, press and hold the Ctrl key until the
Windows
®
98 Startup Menu appears, then select the
number for Safe Mode and press Enter.
3
Select Safe Mode.
• Disable any programs that launch automatically when
you start Windows
®
95/Windows
®
98.
Line-In
MIDI
CD Audio
Line-In
Wave
01WonderGS.fm Page 16 Friday, January 22, 1999 4:34 PM