User`s guide

Installing the Hardware and Software 21

Selecting the sound card

connector for TV audio input

The sound card connector determines which mixer slider is

controlled by the ATI Multimedia Center’s volume slider.

1 Click the Setup button in the TV Player control panel,

then click the Display tab.

2 Click the Initialization Wizard button, then click the Next

button twice.

3 In the Typical Audio Connections page, check I have

connected the cable to confirm that you have connected

your ALL-IN-WONDER card’s audio output cable to your

sound card’s Line-In connector.

4 Click Next to open the TV Sound Initialization Wizard.

5 Click the audio input that matches the connection between

your ALL-IN-WONDER card and your sound card.

(Line-In is the standard audio input when the

ALL-IN-WONDER card’s audio output cable is connected

to the sound card’s Line-In connector.) If you are not sure

how it is connected, click each source (CD Audio, Line-In,

etc.), and listen for the sound.

6 Click the Next button until you reach the End of

Initialization Wizard page, then click the Finish button.

Ensure that the ALL-IN-WONDER card’s audio

output cable is connected to your sound card’s

Line-In connector.