User`s guide

Installing the Hardware and Software 13
Windows New Hardware Found
Windows may start the Add New Hardware Wizard to install
the Standard VGA Driver. To correctly install your new
hardware:
If you are using Windows 2000 or Windows XP, Cancel the
Wizard and proceed to Installing the CATALYST™ Software
Suite on page 13.
•If the Add New Hardware Wizard does not appear, proceed
to Installing the CATALYST™ Software Suite on page 13.
•If the Add New Hardware Wizard does appear:
1 Click Next to allow Windows to search for the Standard
VGA or Standard PCI Graphics Adapter.
If prompted for the Windows CD-ROM, insert it into your
CD-ROM drive.
2 Type the following: D:\operating system name (for
example, D:\WinME).
If D is not your CD-ROM drive, substitute the correct drive
letter.
3 Click OK, click Finish to close the Wizard, then restart
your computer.
Installing the CATALYST ™ Software Suite
ATI’s CATALYST software suite provides the ultimate software
required to enjoy the full power of your ALL-IN-WONDER
card. The CATALYST software suite comprises four, distinct
software elements:
• Display driver
• Multimedia Center
• HYDRAVISION (not included in the Express Install)
• Remote Wonder Software
To ensure you install the latest software, use the ATI Installation
CD-ROM that shipped with your ALL-IN-WONDER card.