User`s guide

12 Installing the Hardware and Software
4 Remove any existing graphics card from your computer.
If your computer has an on-board graphics capability, you
may need to disable it on the motherboard. For more
information, see your computer documentation or contact
the manufacturer.
5 After locating the AGP slot, and if necessary, removing the
metal cover, align your ALL-IN-WONDER card with the
AGP slot, and press it in firmly until the card is fully seated.
6 Replace the screw to fasten the card in place, and replace
the computer cover.
7 Plug the monitor cable into your card.
8 Turn on the computer and monitor.